Lee aqui las opiniones de nuestros clientes Recibe tu producto en solo 1 HORA Internet Retailer Latin America 500
Líder en Guatemala
Skip Repetitive Navigational Links

Buscar productos



Código de este producto: 6516139

Categoría: Electrico - Tester

JYE DSO 138 DIY KIT 13803K (SMD components pre-soldered) (Color: Clear)

(JYE DSO 138 DIY KIT 13803K (SMD components pre-soldered))

Analog bandwidth: 0 - 200KHz.
Sampling rate: 1Msps max.
Sensitivity: 10mV/Div - 5V/Div.
Vertical resolution: 12-bit.
Timebase: 10us/Div - 500s/Div.
Record length: 1024 points.


No disponible, aún no tenemos información acerca de próxima fecha de ingreso

Precio: Q299

 
Avisarme cuando esté disponible
Correo:



JYE DSO 138 DIY KIT 13803K (SMD components pre-soldered) (Color: Clear) JYE DSO 138 DIY KIT 13803K (SMD components pre-soldered) (Color: Clear) JYE DSO 138 DIY KIT 13803K (SMD components pre-soldered) (Color: Clear)
JYE DSO 138 DIY KIT 13803K (SMD components pre-soldered) (Color: Clear)

Descripción del fabricante

DSO138 was designed as a training oscilloscope kit. It contains only the basic oscilloscope functions with no fancy features. Simplicity in structure and easiness in assembly/operation are among the main targets of the design. For these purpose DSO138 uses mostly through-hole parts. The heart of DSO138 is a Cortex-M3 ARM processor (STM32F103C8) from ST. It uses 2.4-inch TFT LCD (320 X 240 dotmatrix, 262K colors) as its display element and displays nice and clear waveforms. Detailed assembly instructions are provided in combination with troubleshooting guide and schematc. Source codes are also available to allow user to add their own features.

This DSO13803K kits has all the SMD parts pre-soldered. The MCU has been pre-programmed and no re-programming required.

Major features of DSO138:

Analog bandwidth: 0 - 200KHz

Sampling rate: 1Msps max

Sensitivity: 10mV/Div - 5V/Div

Sensitivity error: < 5%

Vertical resolution: 12-bit

Timebase: 10us/Div - 500s/Div

Record length: 1024 points

Built-in 1KHz/3.3V test signal

Waveform frozen (HOLD) function available

NOTE: 9V DC power supply required. Not included.

NOTE: Assembly and soldering required.

Escribe un mensaje o comentario sobre este producto:

Nombre   Correo mensaje  
Al realizar tu mensaje aquí tienes garantía de respuesta, si el producto no coincide con las especificaciones de la página o la respuesta proporcionada, te devolvemos el 100% del valor del producto incluyendo el envío.